See samples of our work in Project Photos▼

Complete guide to Selecting Wood Grades▼

Wide Selection of Pre-Finished and Laminate floors▼

Custom made Sample Boards▼

Go to Care & Maintenance for tips how to care for your floors▼

Product MSDS Sheets

Email Bryan Parr

Click to view our Brochure

• Remove debris.  Sweep or vacuum floor to remove grit and debris.
  Make sure vacuum wand is a bristle brush or felt tip.  Swiffer dry wipes
  also work well.

• Clean.  Wet wipe clean the floor using a polyurethane floor cleaner. Spray Cleaner on the floor and wipe off using a terry cloth head cleaner.

• ***Do not clean floors with oil soaps, furniture oil, Pledge,
  Old English, etc.*** These items can cause finish bonding
  problems when you do your next coat.

• Protect.  Place protective pads under all the furniture.  Stick on pads are good pieces that don't move.  We suggest tap ins for wood leg dining table chairs.

• Appliances.  Refrigerator wheels can make bad marks.  We suggest
  a 4'x4' 1/4" plywood sheet to roll the refrigerator on.  The bottom
  edge of the base near the refrigerator should be caulked to prevent
  water from getting under the floor in case of a leak.  Consider
  drilling holes through the hardwood and sub floor under the water
  connection to allow and escape in case of a leak.

• Maintain. Screen and re-coat the floor when it begins to show
  signs of wear.  Do not let the floor wear to the point that the
  traffic lane turns gray. This service is recommended every 2-4 years.

Click HERE to view current BBB Reliability Report